(ko)
Clock MOS (102040)
The Clock MOS is used to turn on a load at specific times of the day:
20 memory allocations allow to program events for every day or for specific
days of the week.
The switch (on negative pole) uses a MOS transistor with low series resistance
and over current protection. A low voltage cut-off (adjustable) protects
the battery against deep discharge.
The circuit is mounted on a standard DIN rail support.
Available in 12 or 24 V, max load current: 6 A
DC/DC converter 18 W - 12V to300 V to supply modern economy lamps. Very practical for modifying existing lamps with more than one bulb. It can drive 2 x 7 W or 3 x 4 W.
For higher power needs, more than one Mini Battnet can be connected in parallel.
It can supply other 230 V loads equipped with a switching power supply (eg modern portable phones) at high efficiency > 92 %.
Dimensions: 32 x 33 x 21 mm
Extended voltmeter (120021 (12V),
22 (24 V))
This measurement apparatus shows the lead acid battery voltage in its
usable range : 10.5 V to 14.5 V in 12 V systems or 21 to 29 V in 24 V
nominal. Easy to read and estimate the battery level of charge.
Dimensions: 60 x 46 x 46 mm
Same as 120021 together with a 15 amps meter. Useful for controlling existing systems which have no meters. Mounted in a small plastic enclosure with transparent cover.
Dimensions: 105 x 105 x 65 mm
Twilight switch(102036)
12 V or 24 V
I out : 3A
Load switch on positive pole (+)
Adjustable light level
Adjustable low voltage cut-off
Down DC / DC converter
V in : 12 - 24 V
V out: 5 - 6 -7.5 - 9 - 12 - 14 V
I max: 2 A
Up DC / DC converter
Lantern recharge from a standard 12 V system
V in : 12 V
V out: 15.5 V
I max: 0.7 A
Notes:
- prices in swiss francs, TVA included, FOB Morges
